Sony RDP-XA900iP Mode D'emploi page 19

About the LINK indicator
Lights up green.
The Wi-Fi network
connection is established.
(Green)
Flashes green.
This unit is in the process of
connecting to the Wi-Fi
network.
(Green)
Please wait.
Lights up amber.
The wired network
connection is established.
(Amber)
Flashes amber.
This unit is in the process of
connecting to the wired
network.
(Amber)
Please wait.
Flashes red k Lights up red
An error has occurred.
Try again from the
beginning, or adjust your
(Red)
network settings.
The indicator turns off.
No connection is
established.
(Nothing)
Tips
• You can also connect the unit to your wireless or
wired network by other methods including Manual
Setup, WPS PIN, etc.
• You can set up Fixed IP, as required.
• You can set up a Proxy Server, as required.
When a problem occurs while you
are making the network settings
Press and hold the RESET (NETWORK)
button on the rear of the unit with a thin object
such as a small pin (page 9).
Notes
• Once you press and hold the RESET (NETWORK)
button, the network settings of the unit are reset.
• Settings other than network settings, including
Bluetooth pairing information, are not reset.
15
US