Gazebo Penguin 456201 Manuel D'installation page 16

STEP 16:
(Pieces: F x4, F-1 x4, F-3 x2, G x4, G-1 x4, G-3 x2)
(Hardware: W-1 x20)
16. a) Starting in one corner, locate the bolts (W) previously inserted into the bottom slot of the
rafter during Step 7, install the end of an upper crossbar (F or F-1) onto the higher bolt, and
hold in place with acorn nut (W-1).
b) Go around the gazebo, locating a bolt (W) at each rafter and installing the end of the
previous crossbar plus one end of the next crossbar, and secure with an acorn nut (W-1).
Slide the bolts (W) up and down the rafter as needed to properly position the crossbars.
c) When reaching the final upper crossbar, remove the acorn nut (W-1) from the first corner,
install the end of the final upper crossbar, and re-secure the acorn nut.
d) Repeat steps a) to c) for the lower crossbars (G, G-1, G-3).
456201.MARSEILLES 10X14.160209.GP.ENG.FR.HOM HOM-HP 16