STEP 14:
(Pieces: O x4, O-1 x4, P-1 x2)
14.
Insert the lower roof panels (O, O-1, P-1) into the bottom groove of the rafters (C, C-1, C-2) as
per the diagram. Start from one corner of the structure and go around until all panels are
completely in the roof joints.
NOTE: Each roof panel comes covered in protective film, one side of which is printed to show
it is UV-treated. Make sure that the UV-treated side faces the sun. The protective film should
only be removed just prior to installation, so as to know which side is which.
456201.MARSEILLES 10X14.160209.GP.ENG.FR.HOM
HOM-HP
14