Taurus Alpatec MALBORK 600 Mode D'emploi page 16

selected temperature, the appliance will stop
heating.
- The indicator appears on the LCD
screen when the appliance is heating up.
- Timer selection
- To program an operating time, press the but-
ton (3) for 5 seconds until the clock icon (XII)
appears on the screen.
- Press (4) or (5) to select the time 30 minutes
intervals (máximum 24 hours).
- To cancel the programmed time, press the
button (3) for 5 seconds until it disappears
from the screen.
DAILY PROGRAM
- Select the desired program (P1-P7) as ex-
plained in the section "Program selection".
- These programs are predetermined, but they
can be modified as desired.
- There are 3 work modes:
- Comfort: and
- Economic: and
- Antifreeze: , the content of the pro-
gram is shown empty.
- Press the button (3) for 5 seconds until
appears.
- Select the comfort mode temperature using
the buttons (4) and (5).
- Press the button (3) to confirm the selection
and will appear.
- Select the economic mode temperature using
the buttons (4) and (5).
- Press button (3) to confirm the selection.
- Press button (2) for 5 seconds until PROG
appears.
- The time slot to be programmed will flcker.
- Press (3) to select the desired work mode
and press (4) or (5) to move to the next or
previous time slot.
- Repeat the operation until the 24 hours are
configured as desired.
WEEKLY PROGRAM
- It consists of configuring each day of the
week with a different program (P1-P7).
- Select the weekly program
- To set the weekly program, press button
(2) for 5 seconds until indicator (III) and (II)
flicker.
- Select the desired program (P1-P7) using the
button (4) and (5) for the flickering date.
- Repeat the operation until the programming
for all the days of the week is completed.
- Press (3) once the weekly programming has
finished.
WINDOW SENSOR
- Press the button (2) to activate the program-
ming settings. Press (4) or (5) to select the
window sensor function
- Once selected press (2) to confirm.
- Press (4) or (5) to select OF or ON.
- Once selected press (2) to confirm.
- Press (4) or (5) to select the window sensor
function .
- Once selected press (2) to confirm.
- When the device detects that the temperature
decreases 2ºC in 2 minutes, it automatically
stops emitting heat.
AUTOMATIC LOCK CONTROL PANEL
- After a minute without pressing any button,
the use of the buttons will be blocked.
- will appear on the screen.
- Press (4) or (5) at the same time to unblock.
BACKLIT SCREEN
- The appliance has a backlit LCD screen to
make it easier to use.
- The screen will turn off if no button is pressed
within one minute.
- Press any button to make it light again.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off button
(1).
- Turn the appliance off using the on/off switch (A)
.
.