Taurus Alpatec MALBORK 600 Mode D'emploi page 15

ance on a cold wall (an exterior wall) and below
a window. But never obstructing or covering a
ventilation area.
- The appliance should work well with its wall
support attached or with its base/feet attached.
- The appliance has a wall bracket (F) which must
be fixed to the wall.
- Ensure that the appliance is properly and safely
fixed in his working position with screws. To
avoid damaging the appliance, on recommend
to use only the holes specifically made by the
manufacturer.
ASSEMBLING THE WALL BRACKET:
- The appliance has a wall bracket (F) on which it
can be supported.
- Fix the wall bracket as you think appropriate,
using plugs, screws, and adhesive...
- Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
the wall. (Fig.1).
- Drill into the wall where marked and insert the
rawlplugs.
- Place the support by matching the holes with
the rawlplugs and screw in firmly.
- Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
appliance.
- Fit the appliance into the wall support.
FITTING THE BASE FEET:
- To assemble the base feet, place the appliance
face down.
- Position the base feet on the body of the appli-
ance using the (G) screws. (Provided with the
appliance).
- Stand the appliance up again so as to check
that the base feet work properly.
INSTRUCTIONS FOR USE
BEFORE USE:
- Prepare the appliance according to the function
you wish to use:
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off switch
(A).
- Turn the appliance on, by using the on/off button
(1).
- For first time use, the screen will show as
follows:
CLOCK AND DAY OF WEEK SETTING:
- The clock and day of week are in the upper left
part of the LCD screen (I) and (II).
- Press the button (3) to adjust the time. Press (4)
or (5) to select the time.
- Press the button (3) to adjust the minutes. Press
(4) or (5) to select the time.
- Press the button (3) to adjust the days. Press
(4) or (5) to select the time.
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
- Press the button (3) to confirm and end the date
and time set up.
PROGRAM SELECTION:
- Press the button (2) to adjust the program.
- Press (4) or (5) to select the desired program,
once selected press (2) to confirm.
- Free
- Daily
- Weekly
- Window sensor
FREE PROGRAM
- Make sure that appears on the screen,
which means that the device is in free program.
- Temperature selection
- Choose the desired temperatura using the
buttons (4) or (5) and wait for the indicator to
stop flickering.
- The temperatura range can be adjusted be-
tween 10-35ºC.
- When the room temperatura is higher than the