SPE HF2-UI Mode D'emploi page 4

Specifications:

High frequency system with advanced technology

Universal input voltage: 85Vac÷264Vac, 50Hz÷60Hz

Charging process fully controlled by microprocessor

Efficiency > 85%

Charge cycle begins with battery as low as 2V

Thermal protection against over heating

Environmentally protected IP66 rating, no Fan

CE compliant

Equipped with NC relay for safety interlock connections

Charging curves for lead-acid, Gel and AGM batteries. Any other curve available on
request

Easy selection between charging curve for Lead-acid (Wet) batteries and for charging
curves for Gel or AGM batteries without opening the charger

EZ-Lamp allows for remote red/yellow/green charge status indicator also displays signals
in case of anomalies. (Battery not connected, reversed...etc)

Protection with an output relay against polarity inversions, short circuits, over-voltages or
anomalies

Maximum relative humidity: 90%

Maximum input current: 15Arms

Operating ambient temperature: –40 to +45 ˚C (-40 to 113 ˚F)

Models available: 24V 25A – 36V 20A – 48V 15A
Dimensions: Inches (mm in brackets)

Height: 3.5 inches (88.9mm)

Weight: 9.5 pounds (4.3Kg)
EZLamp
4
HF2-UI