Heitronic 35950 Instructions D'installation Et D'utilisation page 4

Care and maintenance:

Disconnect the lantern from the power supply before cleaning.

Use only a dry or slightly damp cloth for cleaning.

Never use any chemicals, combustible cleaners or abrasive agents. These can damage the
surface coating and/or the insulation of the lantern.
Disposal:

Old electrical appliances must be disposed of at local collection points, and should not be
disposed of as normal household waste.
Usage:

The lanterns are supplied fully-assembled.

Place the lantern in the required location, observing the warning instructions. Then connect
the power supply cable to the power supply.
Changing the bulb:

Disconnect the lantern from the power supply.

When replacing the bulb immediately after it has failed, first allow the light to cool down
enough to handle the bulb (at least 60 minutes).

Use only bulbs of the type specified in the table. The use of any other type of bulbs can lead to
overheating. Remove the screws on the underside of the lantern and take off the metal cover.
Replace the bulb, and then screw the metal cover back on firmly.
Installation instructions Art. No. 35950-35958 Page 2 of 2
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Date 04.2014