Télécharger Imprimer la page

Power Supply - Heitronic 35950 Instructions D'installation Et D'utilisation

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
GB Installation and operating instructions
Light-ball
Art. No. 35950-35958
Thank you for deciding on the purchase of one of our decorative stone-look lanterns.
Our lanterns are manufactured from robust, high-quality materials to provide you with attractive lighting
in your home or garden.
Please read these operating instructions through carefully before use and keep them for future
reference.
We cannot accept any liability in the event of material or personal damages resulting from improper
use, failure to observe these instructions or unauthorised modifications to the product.
Package contents:
1 Light planet
Installation instructions
Technical data:
Art. No.
35950,35953,35956
35951,35954,35957
35952,35955,35958
Safety and warning instructions:
Remove the lantern carefully from the packaging.
Ensure that the specifications of your domestic installation for the power supply to the lantern
comply with the data on the type designation plate of the lantern.
Before using the lantern, check to ensure that this has not been damaged in any way during
transport. In the event of damage to the cable or electrical components, the lantern must not
be used. Repairs must be carried out only by qualified specialists.
Keep the packaging material away from children and household pets (danger of suffocation)!
Caution! The packaging contains small parts that could be swallowed by children.
Do not allow children to play in the area of the light or other electrical equipment without
supervision.
Do not install the lantern in the immediate vicinity of heat sources, gas or oil pipes, open fires,
high-tension cables or similar objects. Do not allow the product to come into contact with
extreme heat or naked flames.
The cable must not be buried in the ground, and should be cleaned of leaves and dirt as
necessary. Check all equipment regularly for integrity, proper function and any possible
damage.
Ensure that the equipment is set up on a level surface in order to ensure adequate stability.
The lanterns are protected against spray water (e.g. rain). You should however ensure that
they are never placed at points where water collects, and maintain a minimum safety distance
of at least 2.0 m away from ponds or other large areas of water.
The complete product must not be modified or converted. Modifications to the product will
invalidate the guarantee.
Installation instructions Art. No. 35950-35958
Power
Ø
supply
30
230V/50Hz
cm
40
230V/50Hz
cm
50
230V/50Hz
cm
Page 1 of 2
Protection
Bulb
type
230V, E27
ESL max. 11W,
IP 44
LED max. 9W
230V, E27
ESL max. 14W,
IP 44
LED max. 11W
230V, E27
ESL max. 18W,
IP 44
LED max. 15W
Protection
class
II
II
II
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Date 04.2014

Publicité

loading

Ce manuel est également adapté pour:

35958