Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USING YOUR KETTLE
Boiling Water
Do not boil other liquids in this kettle. This
kettle should only be used for boiling water.
1.
Press the
Lid Release Button
the lid.
2.
Fill the kettle to the desired level.
Do not fill above the "
Figure 2.1
[
]
3.
Close the lid and place the kettle onto
the power base. Plug in. [
4.
On/Off
Press the
indicator light will turn on. [
5.
The kettle will automatically turn off
once it has finished boiling the water.
Note:
•
Minimum amount of water needed for
boiling is 0.5 L.
•
You can stop the heating process by flipping
the
On/Off Switch
is operating.
•
This kettle has a dry-run safety feature. If
there is no water inside the kettle, it will
automatically turn off to prevent the heating
plate from overheating.
•
If the kettle overheats, fill it with cold water
and wait for 2 minutes before using again.
to open
MAX
" line.
Figure 2.2
]
Switch. The blue
Figure 2.3
back up while the kettle
]
Figure 2.1
Figure 2.2
Figure 2.3
EN
9
Publicité
Table des Matières
