Using Your Glass Kettle; Boiling Water - cosori CO171-GK2 Instructions

USING YOUR GLASS KETTLE

Boiling Water

Do not boil other liquids in this kettle. This
kettle should only be used for boiling water.
1. Press the Lid Release Button
the lid.
2. Fill the kettle to the desired level. Do
not fill above the "MAX" line.
2.1]
3.
Close the lid and place the kettle onto
the power base and plug in.
4. On/Off
Press the
indicator light will turn on.
5.
The kettle will automatically turn off
once it has finished boiling the water.
Note:
• Always fill the kettle with water to at least the
"MIN" line to prevent overheating.
• You can stop the heating process by flipping
the On/Off Switch
is operating.
• This kettle has a dry-run safety feature. If
there is no water inside the kettle, it will
automatically turn off to prevent the heating
plate from overheating.
• If the kettle overheats, fill it with cold water
and wait for 2 minutes before using again.
8
to open
[Figure
[Figure 2.2]
Switch. The blue
[Figure 2.3]
back up while the kettle
Figure 2.1
Figure 2.2
Figure 2.3