Before First Use; Water Test - cosori CO172-EK Mode D'emploi

EN

BEFORE FIRST USE

Water Test

Do not use the kettle if it is damaged.
Contact Customer Support to
replace your kettle (see page 11).
Perform the Water Test before using your
kettle to make sure it's working properly. Do
not drink the water that is boiled during this
initial test.
1. Remove all parts from the package and
carefully inspect each part.
2. Completely unravel the power cable
and place the power base on a flat, level
surface.
3. Lid Release Button
Press the
Figure 1.1
the lid. [
4.
Fill the kettle with water to the "
line, then close the lid. [
Place the kettle onto the power base.
Plug in.
5. On/Off
Press the
indicator light will turn on. [
6.
The kettle will automatically turn off
once it has finished boiling the water.
Allow it to cool for at least 5 minutes,
then pour out the water.
8
CAUTION!
to open
]
MAX
Figure 1.2
Switch. The blue
Figure 1.3
"
]
]
Figure 1.1
Figure 1.2
Figure 1.3