ELBROLIGHT EPM360/W Mode D'emploi page 21

Presence Sensor with IR Remote Control
1. Mounting plate
2. Decorative cover
3. Infrared motion sensor
Description:
The EPM360 Presence Sensor with Infrared (IR) Remote Control is
an automatic presence and motion sensor for indoor applications. It
can switch up to 2000 W for incandescent lamps or up to 480 W for
fluorescent lamps. It can detect the smallest motion within a 360°
radius of 3 meters. And the lamp remains continually switched on
even when the person present makes only slight movements (e.g.,
when on the telephone).
Note: Please read these instructions thoroughly before begin-
ning the installation.
Safety precautions:
•
Ensure the power source is switched OFF before start-
ing the installation.
•
Ensure the mains source used is fused to max. 16 A.
•
The Presence Sensor is intended for indoor ceiling
1
mounting only.
Important:
Observe local installation regulations. It may be necessary to em-
ploy the services of a licensed electrician for the installation.
EPM360
1
2
3
21