Frequency Range - THOMSON ANT1438 Mode D'emploi

G Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• DAB/UKW antenna
• Power supply unit
• F socket/coax socket adapter
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Children should be supervised to ensure that they do not
play with the device.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Connect the product only to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the power
cord from the socket.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
2
Warning
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the device
yourself. Leave any service work to
quali ed experts.
• Do not open the device or continue to operate it if it
becomes damaged.
4. Specifications
Supply voltage
Rated power
consumption

Frequency range

Connection
Ambient temperature
5. Startup and Operation
• Connect the enclosed power supply unit to the DAB
antenna (pic. 1).
• Connect the DAB antenna to your DAB/FM/UKW tuner
(pic. 1). If necessary, use the enclosed antenna adapter
(pic. 2).
• Perform a channel scan on your DAB/FM/UKW tuner.
• Switch the antenna off using the on/off switch on the
power cable if it is not in use.
Note
Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth
and do not use aggressive cleaning agents.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
220 – 240 V AC / 50 Hz
40 mA
87,5 – 108 MHz
174 – 240 MHz (Band III)
1452 – 1492 MHz (L band)
F-plug/coax socket
-20 to +40° C