Monster iSport FREEDOM Mode D'emploi page 4

WARNING: (1) Please pay attention to the environmental
aspects of battery disposal. Battery must be recycled or
disposed of properly. This product must not be disposed
together with the domestic waste. This product has to be
disposed at an authorized place for recycling of electrical
and electronic appliances. By collecting and recycling
waste, you help save natural resources, and make sure
the product is disposed in an environmental friendly
and healthy way. (2) Batteries (battery pack or batteries
installed) should not be exposed to excessive heat, such
as sunshine, fire, or the like. (3) DO NOT disassemble or
replace the battery. If you suspect there is something
wrong with the battery, please carry the unit to the service
center for help.
Switch On
To switch on, press and hold the multifunction key
about two seconds. The headset beeps ascending tones,
and the green indicator light is briefly displayed. When
the headset tries to connect to the last used phone or
music player, the red indicator light flashes slowly. When
the headset is connected to a device and is ready for use,
the blue indicator light flashes slowly. If the headset has
not been paired with a device, it automatically enters the
pairing mode.
Switch Off
To switch off, press and hold the multifunction key for
about three seconds. The headset beeps descending
tones, and the red light is briefly displayed. If the headset
is not connected to a device within 10 minutes, it switches
off automatically.
Pairing
1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired
with a device, switch on the headset. The headset
enters the pairing mode, and the blue and red indicator
light starts to flash quickly. To pair the headset if it has
been previously paired with another device, ensure
that the headset is switched off, and press and hold the
multifunction key (for about five seconds) until the blue
and red indicator light starts to flash quickly.
3. Activate the Bluetooth feature on your phone or music
®
player, and set it to search for Bluetooth devices.
4. Select "Freedom" from the list of found devices on
your phone or music player.
5. If necessary, enter passcode 0000 to pair and connect
the headset to your device.
Adjust the Volume
To adjust the headset volume, press the volume up or down
key during a call or while listening to music. To adjust the
volume quickly, press and hold either key.
WARNING: Excessive sound pressure from earphones
and headphones can cause hearing loss.
Calls
To make a call, use your mobile phone in the normal way
when the headset is connected to it.
To activate voice dialing (if your phone supports this
feature with the headset), when no call is in progress,
press the multifunction key twice quickly until the phone
starts voice dialing, and process as described in the phone
user guide.
To answer or end a call, quickly press the play / pause
key. To reject a call, press and hold the play / pause key for
approximately two seconds.
To switch a call (in progress) from the headset to the
connected phone, press and hold the play / pause key
for about two seconds. To switch a call (in progress) from
the phone to the headset, press and hold the play / pause
key for about two seconds.
Disconnect the Headphone
To disconnect the headset from your device, switch off the
headset, or disconnect it in Bluetooth menu of your device.
Reconnect the Headphone
To connect the headset to the phone or music player that
you have last used with it, switch on the headset, or make
the connection in the Bluetooth menu of your device.
Listen to Music
To listen to music, connect the headset to compatible
music player that supports A2DP Bluetooth profile. The
available music functions depend on your music player.
If you receive or make a call while listening to music, the
music is paused until the call ends.
To play a song, select in the music player and press the
play / pause key on the iSport
or resume playing a song, press the play / pause key.
To select the next song during playback, press the track
forward key quickly. To select the previous song, press the
track back key (once or twice) quickly. To scroll through
the current song quickly, press and hold either key.
Clear Settings or Reset
To clear the pairing settings from the headset, switch off
the headset and press and hold the multifunction and
volume down keys (for over eight seconds) until the red
and blue indicator lights alternate three times.
To reset the headset, connect the headset to a charger
and press both the multifunction and volume up keys.
Passive Mode
You can use iSport Freedom as a wired headphone
®
to save batteries. Simply connect one end of the included
ControlTalk Universal cable to the bottom of the earcup
™
and the other to your MP3 player. Inserting an audio cable
disables wireless functionality.
Using ControlTalk Universal
Freedom headset. To pause
®
™