C Leaning - SUHNER ABRASIVE SP 700 Dossier Technique

4.1.1 d /
etAching connecting the suPPly hose
Turn the coupling with the exhaust air hose through 45° to
the right or left so that it can be pulled back and off.
Press the hose coupling to disengage it. You can now pull
out the air supply hose.
V
ery shArP BlAde
4.2 c
leAning
4.2.1 r
egulAr cleAning
The compressed air motor must be
cleaned and disinfected regularly with
drinking water at ≥ 80 °C in accordance
with DIN 10516:2009-05, Table 3. No chemical cleaning
agents and no chemical disinfectants may be used. Make
sure particularly that meat and other residue is removed
at regular intervals.
V
ery shArP BlAde
4.2.2 d
Aily cleAning
After disconnecting the compressed air
drive (see 4.1.1), clean every part carefully
in accordance with 4.2.1.
22
!
!