Intercom Hold; Ntercom Onference Alls - RCA 25423 Mode D'emploi

Answering an Intercom Call
When you receive an Intercom call, the Intercom indicator flashes red, and the display
shows the caller's name and phone ID.
NOTE: If you want to answer with the speakerphone, press the Intercom or Speaker button. If
you want to answer by headset, press the Headset button (the headset must be connected).
To answer by handset, lift the handset.
NOTE: Press Speaker or lift the handset to automatically select a party. If you receive an
incoming call and intercom call at the same time the unit automatically selects the ringing
line.

Intercom Hold

1. Make an intercom call or answer an intercom call.
2. Press the Hold button. The Intercom indicator flashes blue.
NOTE:
• When the intercom is on hold, you may not receive another intercom.
• If the other party terminates intercom, intercom hold is also released.
Intercom Conference Calls
This feature allows you to have a 3-way conversation using the intercom feature and an
open line.
1. Place a call or make an intercom call.
2. Press the Hold button.
3. Place a call on another line or make an intercom call.
4. Press the Conference button.
5. Speak to both parties.
NOTE: If you have more than one party on hold (telephone line or intercom), you must select
the line for the party you want to conference with.
To disconnect one party:
Press the line or intercom button for the person you want to continue speaking with, and
the other party is automatically disconnected.
To disconnect both parties:
Hang up the handset, or press the Speaker button.
NOTE: If you press the Hold button to put them on hold first, you may then disconnect from
each party individually.
Intercom Calls
2