Cameo ROOT PAR BATTERY Manuel D'utilisation page 15

This will take you to the submenu for setting the submenu options (see table, use  and to
select, press ENTER to confirm, use  and  to change the value or status, press ENTER to
confirm). The settings are made separately for each program and remain unchanged even after
the device is restarted.
STANDALONE MODE AUTO / SOUND (PROGRAMME 1 to PROGRAMME 6)
Dimmer Sets brightness
Speed Sets running speed
Activates/deactivates music-control
Sound
Sens Sets microphone sensitivity
Delay Delay time for slave groups
STANDALONE MODE STATIC
The standalone mode static allows the dimmer, strobe, R, G, B and W values to be set directly on
the device, with values between 000 and 255, in a similar way to with a DMX controller. In this
way, an individual scene can be created without an additional DMX controller.
Starting from the main display, press MENU to enter the main menu. Now use  and  to select
the menu item Stand Alone and confirm with ENTER. Again use  and  to select standalone
mode Static and confirm with ENTER. Using  and , now select the menu item that you wish
to edit and confirm with ENTER. You can use  and  to configure the desired value between
000 and 255. Confirm all entries with ENTER.
--------Menu------- ----Stand Alone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Stand Alone
User Color
Slave
Loop
Settings
System Info
COLOR PRESET STAND-ALONE MODE
15 different color presets plus Jump and Fade are available as presets; the brightness can be
configured separately for each preset, as well as the operating speed for Jump and Fade.
Starting from the main display, press MENU to go to the main menu. Using the  and  but-
tons, now select the Stand Alone menu option and press ENTER to confirm. Use  and  again
to select the stand-alone mode Color Preset and press ENTER to confirm your selection. Now
use  and  to select the color you want as a preset and press ENTER to confirm your selection
(Off = Blackout; Speed refers to Jump and Fade). You can set the brightness as desired from 000
to 100 using  and . Confirm with ENTER.
----Static Mode----
Dimmer 0 - 255
Strobe 0 - 255
Red 0 - 255
Green 0 - 255
Blue 0 - 255
White 0 - 255
0 - 100
0 - 100
Deactivates
Off
music-control
Activates
On
music-control
0 - 100
0.0s - 2.0s
15