Comfort Collar; Air Controls - MAAX Spas Performance 400 Série Guide De L'utilisateur

To clean the jet insert and housing, use a
pressurized hose and spray the inside of the
jet. Soak the jet in a diluted spa cleaning
solution, rinse. Wipe the inside of the housing
to remove any debris.
To reinstall the jet, line up the tab on the
backside of the barrel with the groove in the
body. Use the palm of your hand to gently
tab the jet until it snaps into position.

Comfort Collar™

Select models in the 400 series are equipped
with special above-the-waterline neck jets
in the Comfort Collar™. The intensity of the
water flow to these jets can be controlled
by turning the jet to the most comfortable
setting.

Air Controls

The intensity of the jet action can be con-
trolled by altering the amount of air injected
with water through the jets. Your spa has 2
to 4 air controls located on the lip of the spa.
Each control activates air to specific jets
in the spa allowing you to create various
combinations and levels of jet action to suit
individual preferences. Turn the control coun-
ter-clockwise to turn the air off and clockwise
to turn air on.
NOTE: Air controls should be closed
during heating cycles for maximum
energy efficiency.
NOTE: If spa is equipped with the Aeromax
option, one control should be left open at
all times.
MAAX SPAS PERFORMANCE SERIES
12