Attach The Exhaust Hose - turbionaire REVIGO10 Manuel D'instructions

ATTACH THE EXHAUST HOSE

The air conditioner requires being vented outside so that the exhaust
air can escape the room which coming from the appliance contains
waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased
efficiency, even worse shut down the unit due to low backpressure.
Step 1: Connect the hose connector to one end of the exhaust hose.
Step 2: Connect the windows kit adapter to the other end of the
exhaust hose.
Step 3: Extend the adjustable window kit the length of your window. Connect the
exhaust hose to the window kit.
Step 4: Close your window to secure the kit in place. It needs to hold the windows kit firmly
in place, secure the window kit with duct tape if required. It is recommended that the gap
between the adapter and the sides of the window should be sealed off for maximum
efficiency.
Step 5: Attach the hose connector to the exhaust air
outlet of unit.
10