Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
89682 99
2.
Do not disassemble or crush the battery as the contents
are corrosive and flammable. Exposure may cause an injury.
3. Tools with internal rechargeable batteries or removable
battery packs are designed to be used only with that
battery configuration. Do not mix different battery pack
brands or use adapters to allow the use of a battery pack
with a different voltage. This can damage the tool's
electrical mechanism and create a fire hazard.
4. Discontinue using or charging a li-ion battery if it changes
shape or is abnormally hot. The battery may leak or ignite.
Move the battery to a fireproof location and observe for 15
minutes. Safely dispose of the battery.
5. Do not allow a Li-ion battery to fully discharge. This will
damage the battery.
6. Do not store in temperatures over 140°F/60°C. The battery
may rupture or leak.
7.
Do not leave li-ion battery unattended when recharging.
Remain to observe the recharging process in case a
problem occurs. Place the battery and recharger in a fire-
proof container.
8. Do not charge leaking batteries. A compromised casing will
release volatile chemicals and gases. Charging a leaking
battery can cause a fire or explosion.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the contents are included.
Contents:
•
Conical shape tip (1/8 in.)
•
0.04 in. lead-free solder wire (0.35 oz.)
•
0.06 in. lead-free solder wire (0.35 oz.)
6
4V CORDLESS SOLD ERING IRON
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
