Battery Precautions - PRO-POINT 8968299 Mode D'emploi

V1.0
generates considerable heat and can inflict a burn injury
and/or damage materials during use.
6. Never file the soldering iron's specially plated tip.
7. Make sure to have sufficient ventilation while soldering;
solder or solder flux can be harmful.
POWER TOOL PRECAUTIONS
1. Do not use any power tool with a malfunctioning power
switch or control. A power tool that fails to respond to the
controls is dangerous and could cause an injury. A qualified
technician must repair and verify the power tool is
operating correctly before it can be used.
2. Do not cover the air vents. Proper cooling of the motor is
necessary to ensure normal life of the tool.
3. Avoid unintentional starting. Ensure the switch is off when
connecting to the power source.
4. Disconnect the power source before installing or servicing
the tool.

BATTERY PRECAUTIONS

WARNING! Do not charge a damaged or frozen battery.
Internal damage may allow the battery contents to leak,
creating a hazardous spill. Contact your local municipality for
proper disposal procedures.
WARNING! Only charge a battery with a charger designed for
that purpose. Do not use modified chargers or a charger that
does not specify the voltage, amperage or recharge rate.
Improper charging can lead to the battery rupturing.
WARNING! Do not disassemble the charger or batteries.
Lithium batteries contain toxic and volatile materials that are
dangerous.
1. Do not expose the battery to heat or throw it in a fire. Keep
any ignition source, such as flames, sparks or embers away
from the battery. The contents are flammable and the
battery may explode. Do not inhale smoke issuing from the
burning battery as it is toxic.
Visit www.princessauto.com for more information
4V CORDLESS SOLD ERING IRON 8968299
5