PRO-POINT 8968299 Mode D'emploi page 4

89682 99
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2. Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3. Wear protective clothing designed for the work
environment and tool.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2. Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
2. Do not use the tool if any parts are damaged, broken or
misplaced. Repair or replace the parts.
3. Always keep fingers, hands, body and clothing away from
heated components of this tool.
4. The tool will remain hot for a few minutes after use. Always
rest the tool on a stand where heat from the tool cannot
damage nearby items.
5. Do not touch the soldering iron tip or place it on a
combustible material until it has time to cool. This tool
4
4V CORDLESS SOLD ERING IRON
For technical questions call 1-800-665-8685
V1.0