Quax COCOON 54F01-0400XL Serie Manuel page 35

4. Assembling the wardrobe
Step 4.2 : Use the left intermediate side 3L, four wooden dow-
els E, a slider L, nine wood screws A, two rod holders S, four
shelf supports T and four hinge mounting plates R
Push two wooden dowels (E) into the drillings at the top and
bottom of the intermediate side (3L). Disassemble the slider
(L). Place the outer slider on the holes on the right side of the
intermediate side. Attach the slider with fi ve wood screws (A).
Note the detail. Push the shelf supports (T) into the drillings on
the right side of the intermediate side. Place the rod holders (S)
on the drillings in the middle of the left side of the intermediate
panel. Attach the holder with two wood screws (A). Push the
four hinge mounting plates (R) into the holes on the right side
of the intermediate panel.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
COCOON 54F01-0400xXL
T 0032 9 380 80 95
Step 4.1 : Use the left side 1, the right side 2, eight
wooden dowels E, four connectors F, six hinge moun-
ting plates R, four rod holders S, eight wood screws A
and six shelf supports T
Tighten the connectors (F) in the drillings on top of the
sides (1 and 2). Push two wooden dowels (E) into the
holes at the top and bottom of the sides. Push three
hinge mounting plates (R) into the holes at the front of
the left side. Push three hinge plates (R) into the dril-
lings at the front of the right side. Place the rod holders
(S) on the drillings in the middle of the sides. Attach the
supports with two wood screws (A). Push the shelf sup-
ports (T) into the holes of the sides.n.
35
www.quax.eu - E E info@quax.eu