Forest-Master FM5 Mode D'emploi page 15

FITTING THE DUOCUT BLADE AS
AN ACCESSORY (FM5, FM8)
To fit the Duocut blade, remove the
four bolts holding the pusher block in
place (an open ended offset spanner
is best for turning the nuts) and
remove the pusher block from the
cradle.
Remove the plastic insert from the
bottom of the pusher block and
attach to the bottom of the Duocut
blade.
Fit the Duocut blade into the cradle
and secure with the four bolts and
nuts.
NOTE: As the FM10 can split the wood from both ends, it
is extremely unlikely that a log will become jammed.
FM5, FM8 & FM10 (All Versions)
Do not try to knock the jammed
log off. Knocking the log will
damage the machine or may
launch the log and cause an
accident.
15