Adsl Router Leds - Topcom Xplorer 870+ Manuel D'installation

Xplorer 870+

1. ADSL ROUTER LEDS

PWR
LEDs Description
PWR The power LED is on when power is applied to the ADSL Router. Check your
power adapter connection if the LED is off.
ALM ALM LED will be ON if no WAN connection is established.
LLK LAN Link LED. It is on when there is an Ethernet connection; otherwise, it is
off when the Ethernet cable is not connected.
LAC LAN Activity LED. It blinks when there is Ethernet traffic passing through
ADSL Router; otherwise, it is off.
WLK WAN Link LED. It is on when there is an ADSL connection; otherwise, it is off
when the ADSL cable is not connected or the ADSL connection fails.
WAC WAN Activity LED. It will blink when there is ADSL traffic passing through
ADSL Router; otherwise, it is off when ADSL link is down.
Note: All LED's are on for approximately 30 seconds when you power on or reboot the ADSL
Router.
ALM LLK LAC WLK WAC
5 5 5 5 5 5 5