RiverRidge 06-144 Instructions D'assemblage page 9

STEP 3
9
C C
1.
Insert 4 wood dowels (C) into wood dowel holes on front panel (4).
2.
Attach middle left side panel (8) and middle right side panel (9) to front panel (4) by inserting
wood dowels (C) into wood dowel holes and cam bolts (A) into cam bolt holes on middle left
side panel (8) and middle right side panel (9).
3. Insert 2 cam locks (B) into cam lock holes on middle left side panel (8) and middle right side
panel (9), then rotate clockwise to secure cam bolts (A) in place.
4.
Slide bottom board (5) into grooves on middle left side panel (8), middle right side panel (9)
and front panel (4).
5.
Insert 4 wood dowels (C) into wood dowel holes on middle left side panel (8) and middle right
side panel (9).
6.
Attach back panel (4) to middle left side panel (8), middle right side panel (9) and bottom
board (5) by inserting wood dowels (C) into wood dowel holes on back panel (4) and cam
bolts (A) into cam bolt holes on middle left side panel (8) and middle right side panel (9).
7. Insert 2 cam locks (B) into cam lock holes on middle left side panel (8) and middle right side
panel (9), then rotate clockwise to secure cam bolts (A) in place.
B
B
C C
4
C
8
9
4
C
5
C C
B
B
4
8