RiverRidge 06-144 Instructions D'assemblage page 8

STEP 1
1. Screw 2 cam bolts (A) into holes on front panel (4).
2. Repeat above step to assemble another 2 front panels (4) and 3 back panels (4).
STEP 2
7
C
1. Insert 4 wood dowels (C) into wood dowel holes on front panel (4).
2. Attach upper left side panel (6) and upper right side panel (7) to front panel (4) by inserting
wood dowels (C) into wood dowel holes and cam bolts (A) into cam bolt holes on upper
left side panel (6) and upper right side panel (7).
3. Insert 2 cam locks (B) into cam lock holes on upper left side panel (6) and upper right side
panel (7), then rotate clockwise to secure cam bolts (A) in place.
4. Slide bottom board (5) into grooves on upper left side panel (6), upper right side panel (7) and
front panel (4).
5.
Insert 4 wood dowels (C) into wood dowel holes on upper left side panel (6) and upper right
side panel (7).
6.
Attach back panel (4) to upper left side panel (6), upper right side panel (7) and bottom board
(5) by inserting wood dowels (C) into wood dowel holes on back panel (4) and cam bolts (A)
into cam bolt holes on upper left side panel (6) and upper right side panel (7).
7. Insert 2 cam locks (B) into cam lock holes on upper left side panel (6) and upper right side
panel (7), then rotate clockwise to secure cam bolts (A) in place.
A
B
B
6
C
C
4
A
4
C
7
C
×6
4
C
5
C C
B
B
6
4