Care And Maintenance - EDM Product 08725 Manuel D'instructions

LIST OF COMPONENTS
1. Chuck
2. Head
3. Depth gauge
4. Impact switch
(Drilling / Impact Drilling)
5. Ignition lock switch
6. Left / right rotation switch
7. Rotation speed adjusting ring
8. On / off button
9. Gear selection
10. Auxiliary handle
ATTACHABLE HANDLE DETAIL
4
5
Instruction manual
2
3
1
1. Depth gauge
2.Rotating button
3. Clamp holder
4. Handle
5. Handle cap
10

CARE AND MAINTENANCE

DANGER OF INJURY!.
Before all care and maintenance work:
Turn the machine off.
Pull out the power plug.
Wait until the machine is still.
▶Cleaning
Clean the machine regularly after each use from dust, shaving, wood
splinters, etc.
Clean the machine with a moist cloth and some soft soap. Do not use
any detergents or solution; these can corrode the plastic parts of the
machine. Make sure that no water reaches the inside of the machine.
▶Servicing
There are no parts on the inside of the machine which require
maintenance by the user.
Should the machine fail to function after a long operation time, have it
checked by a technician.
▶Replacement parts
Use only original replacement parts.
08725
REF.
ES
PT
EN
FR