Publicité
Les langues disponibles
Les langues disponibles
MOUNT PLATE FOR "GLACIER PRO" PLOW FRAME
KIT PN 2879105
INSTALLATION INSTRUCTIONS
INSTALLATION WITH WINCH INSTALLED
1.
Remove the four existing bolts as illustrated.
2.
Fasten the upper part of the mount plate a to frame
using the
(4) M12-1.75 X 30 mm
nylock nuts h (finger tighten at this time).
M12-1.75
NOTE : Be sure to use the correct mounting holes.
7515232
A-7515232
3. Fasten the lower part of the mount plate a to frame
FRONT VIEW
hex bolts g and the
(4)
4.
FRONT VIEW
- 2-
using the
(3) M10-1.5 X 35 mm
lock washers i, and the threaded support e.
Tighten all bolts and nuts.
NOTE : Be sure to use the correct mounting holes.
Front of
the ATV
Assemble the lift rod c to pushframe as illustrated.
NOTE : The "V" shape of the lift rod must be
downwards.
hex bolts f, the
(3) M10
LEFT FRONT VIEW
Printed in China
Publicité
