Technical Data - Stagnoli ACNSEM3L Mode D'emploi

Any improper use of the product or misplaced connection may compromise the correct functioning of the product itself and the
Power supply: 24Vac/dc
Max accessories power current: 0,5 A
Operating temperature: -20°C/60°C
IT
ACNSEM3L by Stagnoli is a control unit designed for traffic lights with 2 or 3 lights.
EN
Made only from first-choice materials, it has been designed to have a low absorption at rest, allowing for net energy savings. Special
attention has been given to the professionals in this sector to facilitate the programming of the control unit by means of a multi-language
display.
FR
ES
DE
24VAC
IN
+ -
~ ~
1. Terminal board for power supply 24Vac/dc
2. Power supply and accessories fuse (T0,5A, 5x20)
3. Traffic light 2 terminal board
4. Traffic light 1 terminal board
5. Traffic lights management fuse (F2A 5x20)
6. Priorities input terminal board, with control devices (photocells, detection devices, etc.):
IN1: programmable input for traffic light 1, N.O. by default
IN2: programmable input for traffic light 2, N.O.by default
IN3: emergency programmable input, N.C. by default
7. Auxiliary power supply 24Vac/dc 0,5 A
8. Menu navigation buttons
9. 5-language LCD display (IT, EN, FR, DE, ES)
DL2- Traffic light operation 1
DL1- Traffic light operation 2
8
The following manual is intended qualified technical personnel responsible for the installation.
We recommend reading these instructions carefully before proceeding with the installation.
INTENDED USE AND LIMITATIONS OF USE
DESCRIPTION OF THE PARTS
0000
2
1
R2 A2 V2 R1 A1 V1
COM2 COM1
24VAC
IN
INSTRUCTIONS
safety of the final user.

TECHNICAL DATA

Max lights power current: 2A
Accessories power supply: 24Vac/dc
NOTE: the type of output current is determined by the type of input
current
9
0000
E
R2 A2 V2 R1 A1 V1
COM2 COM1
3 4 5
8
DL2
E DL1
7
6
www.stagnoli.com
FIG 1