Set The Alarm - SOUNDMASTER DAB700 Mode D'emploi

device is paired successfully, the "Bluetooth mode" will stay on.
3. Press the "SELECT/ENTER" to start or interrupt the playback.
4. Rotate the "SELECT/ENTER" knob to choose the previous or next track.
This unit contains also a hands-free function. If you have connected a mobile phone by
Bluetooth and you get a call, press the "SELECT/ENTER" button to activate the function.
To de-activate the function press the "SELECT/ENTER" button again. The music playback will
be continued.
The function can only be selected when USB stick or Micro SD Card is inserted!
1. USB: Plug the USB device at the back side of the unit.
MICRO SD: Plug the Micro SD Card into the Micro SD Card slot at the back side of the
unit.
2. Press the "ST/BY / MODE" button repeatedly to select the USB or MICRO SD mode.
3. Press the "SELECT/ENTER" to start or interrupt the playback.
4. Rotate the "SELECT/ENTER" knob to choose the previous or next track.
1. Plug the AUX cable at the back of the unit (not included)
2. Press the "ST/BY / MODE" button repeatedly to select the AUX mode.
3. Start the playback of your external device.
1. Turn the radio on and press the "SLEEP/NAP" button to active the sleep function.
2. Press the "SLEEP/NAP" button repeatedly to choose the sleep time 15/30/45/60/90
3. The unit will power off after the time which you choose.
Note:
1. If you want to check the sleep left time, press the "SLEEP/NAP" button one time after you
set the sleep time.
2. If you want to reset the sleep function, press the "SLEEP/NAP" button repeatedly until
"Sleep off" is shown in the display.

SET THE ALARM

1. While switched on, press the "MENU" button and turn the "SELECT/ENTER" button to
select the "System" function and press the "SELECT / ENTER" button.
2. Use the "SELECT/ENTER" button to select the "Alarm" function again and press the
"SELECT / ENTER" button.
USB / MICRO SD
This symbol will show on the display when you turn on the sleep function
AUX
SLEEP
ALARM
6
DAB700 / English Instruction Manual