Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Press the "ST/BY / MODE" button repeatedly to select the FM mode.
AUTOMATIC STATION SEARCH
1. Rotate the "SELECT/ENTER" knob clockwise and press the "SELECT/ENTER" knob. The
radio begin to search forward and will automatically stop when a station is found.
2. Rotate the "SELECT/ENTER" knob counter-clockwise and press the "SELECT/ENTER"
knob. The radio begin to search backward and will automatically stop when a station is
found.
MANUAL STATION SEARCH
Rotate the "SELECT/ENTER" knob until the desired radio station is found.
Note: In order to get a better reception, please adjust the antenna position. Under the
"Audio setting mode", choose the mono mode , the FM reception effect will be better.
AUTO STORE RADIO STATIONS
Press and hold the "SELECT/ENTER" button to start the auto scan. During the scan the display
will show "Scanning...". After the scan has finished, the unit will select the first found station.
STORE RADIO STATIONS
To store radio stations is the same as in DAB mode.
RECALL STORED RADIO STATIONS
To recall radio stations is the same as in DAB mode.
FM DISPLAY INFORMATION
Press the "INFO" button repeatedly to cycle through the information modes. The information is
displayed on the lower segment of the display.
SCAN SETTING (Strong Stations/ All Stations)
Press the "MENU" button to enter into the "Tune Select Menu". The display will show"
1.
"Scan setting".
2. Press the "SELECT/ENTER" knob to enter the scan setting. Rotate and press the
"SELECT/ENTER" knob to select the desired scan mode.
AUDIO SETTING (Stereo allowed/ Forced mono)
1. Press the "MENU" button to enter into the "Tune Select Menu". Rotate the
"SELECT/ENTER" knob to choose "Audio setting" and press the "SELECT/ENTER" knob to
confirm.
2. Rotate the "SELECT/ENTER" knob to select the desired audio setting "Stereo allowed" or
"Forced mono". Press the "SELECT/ENTER" knob to confirm.
If you are using a Bluetooth audio device, make sure the working distance is within 10 meters.
Different environment may have effect on the working distance.
1. Press the "ST/BY / MODE" button repeatedly to select the Bluetooth mode ("Bluetooth
mode" will flash in the display).
2. Turn on the Bluetooth function on your audio device and choose "DAB700". After your audio
FM
®
BLUETOOTH
5
DAB700 / English Instruction Manual
Publicité
Table des Matières
