Installation Instructions - Danby Designer DUF138E1WDD Guide D'utilisation Et D'entretien

Installation Instructions

LOCATION
Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a wet, luke-
warm cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight, or moisture. Let air circulate
freely around the unit. Keep the rear of the unit 10.6 cm / 4 inches away from the wall, ensure there is 20.3 cm / 8 inches
of clearance between each side and the wall and ensure there is 30.5 cm / 12 inches of clearance between the top of the
unit and any cabinets or ceilings. This will allow proper air circulation.
1. Locate the freezer in such a manner that extension cords are not necessary.
2. Select a location with consistent year round temperatures. We do not recommend operating the freezer when sur-
rounding air temperature is below 5°C (41°F), though it will not harm the freezer to stand in any temperature below
5°C (41°F), provided the temperature control is set to avoid running the unit. In order to keep operating cost down, do
not place freezer near a stove, furnace, heat register or in direct sunlight. Avoid placing the unit in a damp or moist
area, such as basements.
FEATURES
1. Interior Light Switch
2. Light Cover
3. Temperature Sensor
4. Freezer Shelf
5. Airfl ow Outlet
6. Airfl ow Inlet
7. Freezer Drawer
8. Door Shelf
9. Wire Door Basket
4