afriso KSG Magnum Serie Mode D'emploi page 30

9 Troubleshooting
Any malfunctions that cannot be removed by means of the measures
described in this chapter may only be repaired by the manufacturer.
BURNS CAUSED BY HOT LIQUID
Water in heating systems is under high pressure and can have temperatures of
more than 100 °C.
• When there is a malfunction of the product, take all necessary measures to
ensure that hot liquids do not pose any hazard to persons.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
Problem
Pointer of pressure
gauge below green
range
Pointer of the pressure
gauge again below
green range after filling
of the system
Other malfunctions
1. After a malfunction, you must perform a function test (see
chapter "Function test").
Troubleshooting
WARNING
Possible reason
System pressure too
low
Leak in system
-
Repair
Fill liquid into the system
until the pointer of the
pressure gauge is in the
green range.
Check the system for
leaks
Contact the AFRISO
service hotline
KSG Magnum
EN
14