Operating status (with no charger plugged in)
Indicator light
Off
3 blue flashes
Steady blue
Rapid blue/purple flashes
Quick blue flash
Quick purple flash
Slow blue pulse
Slow blue flash
Slow green flash
Slow red flash
Slow purple pulse
Steady red
Quick red flash
Note: After 1 minute on a call or 20 minutes of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Tips and tricks
Restore to factory settings
Caution: This action erases all pairing information stored in your headset.
To restore your headset to original factory settings, with the headset turned
on, press and hold both Volume buttons and Call button for 10 seconds until
the indicator light is steady blue.
Headset status
Power off
Powering on/off
Pairing/connect mode
Connection successful
Incoming/outgoing call on phone 1
Incoming/outgoing call on phone 2
Connected (on a call)
Standby (connected to one phone)
Standby (connected to two phones)
Idle (not connected to a phone)
Connected call muted
Attempting to connect
Low battery
English
9