Chauvet DJ FlareCON Air Guide De Référence Rapide page 7

FlareCON™ Air QRG
Wireless Control
with DMX Products
When using FlareCON™ Air to wirelessly send D-Fi™ signals while using DMX
lights that have no D-Fi™ capability, FlareCON™ Air must be used with a
D-Fi™ Hub. The FlareCON™ Air creates a wireless network (Wi-Fi™) for
receiving the signals from the mobile device, and sends D-Fi™ signals wirelessly
to the D-Fi™ Hub. D-Fi™ Hub then converts those signals to DMX and sends
those signals through a DMX cable to the DMX lights.
Mobile Device sends
Wi-Fi™ Signal to
FlareCON™ Air
FlareCON™ app on
Tablet or Smartphone
Be sure to connect only one smartphone or tablet at a time.
·
The tablet or smartphone running FlareCON™ app should be within
100 feet (30.5 m) of FlareCON™ Air.
·
Always install FlareCON™ Air within 600 ft (183 m) of the products
receiving D-Fi™. FlareCON™ Air works best within the line of sight of
the D-Fi™ products.
For information about configuring a product to receive D-Fi™ or wireless
DMX signals, see the User Manual for that product. User Manuals for
CHAUVET® products are available from the Chauvet website at
http://www.chauvetlighting.com/product-manuals-literature/.
FlareCON™ Air
D-Fi™ Hub sends
DMX Signal to
DMX-compatible
Product via Cable
7
EN
FlareCON™ Air sends
D-Fi™ Signal to
D-Fi™ Hub
D-Fi™ Hub