Melnor 3050 Mode D'emploi page 6

TO SET DATE
Press or
(Holding down keys will scroll numbers for faster selection.)
Press ACCEPT
ACCEPT
flash.
Press or
Holding down keys will scroll numbers for faster selection.
ACCEPT
Press ACCEPT
Press or
Press ACCEPT
ACCEPT
for pre-set schedule #1.
LIGHT
Unit has two lights in face of timer if you are located in a dark area for programming.
LIGHT
Press light key to turn on lights.
LIGHT
Press light key again, to turn off lights.
NOTE: Keep lights off during normal operation to save battery life.
to select current month. Unit will beep one (1) time for each press.
when current month flashes. Unit will beep one (1) time and day of month number will
to select current day of month. Unit will beep one (1) time for each press.
when current day of month flashes. Unit will beep one (1) time and day of week flash.
to select current day of week. Unit will beep one (1) time for each press.
when current day of week flashes. Unit will beep one (1) time and return to Auto mode,