eufy Security T8960 Mode D'emploi page 7

LED Indication
LED indicator Status
Keypad indicator blinks
white 3 times
Numeric keypad
area
Only × and √ buttons
blink white for 5s
Solid blue
Blinking blue
Mode button ( /
/ )
Solid white
Blinking white
Note: When the Away ( )/ Home (
simultaneously, it indicates that the current security mode is not associated with
these buttons or specified on the app.
Buzzer Indication
Scenario Buzzer Description
Press any key on the keypad Buzzes once
Operation error (access code /
Buzzes three times
Mode switch error)
Countdown reminder Buzzes continuously until the end
Waiting to bypass devices Buzzes for 5s
Press Panic button for 3s Buzzes quickly for 3s
10 English
Description
Access code error
Device faults detected that must be
dealt with to switch to a certain mode
The current mode is active
The current mode is active and the
countdown has started for you to
leave the house.
Device faults detected that must be
dealt with to switch to a certain mode
Failed to switch mode
)/CUS ( ) buttons blink blue
OPERATING ON THE EUFY
SECURITY APP
All operations, such as mode switch, alarm on / off, device bypass, OTA update can
be performed on the eufy Security app.
Keypad Settings
On the eufy Security app, you can create the following settings:
• Set Away, Home, Customized, and Off security modes. Make sure the mode
associates to the Keypad button accordingly.
• Change access code
• Create access codes for other family members or guests. Up to 6 access
codes are supported. The access code should be 4 digits to 8 digits by default.
• Name the device
• Set emergency code. After entering the set code, the alarm will be disabled. A
specified message will be sent to emergency contacts via the app.
• Synchronize the Keypad status: Connected, disconnected, charging, factory
default.
Access Code Management
The eufy Security app allows you to assign an access code to your family members,
friends or visitors.
To assign the access code to them, open the eufy Security app, go to the Keypad's
Device page, enter the user name and assign a new access code.
You can set an expiration date for each access code. Access codes beyond the
expiration date are invalid. This may be suitable for temporary visitors.
Note: Up to 6 access codes can be added on one HomeBase.
English 11