Inspection And Checking; Maintenance; Troubleshooting List; Bonum Battery Operated Clipping Machine - B.Braun Aesculap Bonum Mode D'emploi

Aesculap
Bonum large animal battery-operated clipping machine
6.2

Inspection and checking

►
Allow the product to cool down to room temperature.
►
Inspect the product after each cleaning and disinfecting cycle to be
sure it is: clean, functional, and undamaged.
►
Check the product for any damage, abnormal running noise, overheat-
ing or excessive vibration.
►
Inspect the shearing head for broken, damaged or blunt cutting edges.
►
Set aside the product if it is damaged.
7.

Maintenance

To ensure reliable operation, Aesculap recommends servicing the product
at least once a year.
8.

Troubleshooting list

8.1

Bonum battery operated clipping machine

Malfunction
The battery-operated clipping machine does not
start
The battery-operated clipping machine pauses dur-
ing operation
8.2

Charger and Li-ion battery

Malfunction
Charger not working
10
®
Cause
Li-ion battery not loaded
Li-ion battery defect
Li-ion battery not inserted
Li-ion battery deactivated through protective
circuit
Li-ion battery is empty
Detection
The "Battery" LED indicator is not
lit up
Li-ion battery not loaded
Remedy
Load Li-ion battery
Insert new Li-ion battery
Insert the Li-ion battery
Switch the battery-operated clipping machine
off and on again
Insert new Li-ion battery
Cause
Mains power cord not plugged in
Mains power cord defective
Li-ion battery defect
Remedy
Plug in the mains connection line
at the mains power socket.
Send charger to manufacturer for
repair; see Technical Service
Send Li-ion battery to manufac-
turer for repair, see Technical Ser-
vice