Technical Data - Power Fist 8064685 Manuel Du Propriétaire

Technical Data

Sanding pad
Free speed
Avg.Air consumption
Operating pressure
Air inlet size
Air hose
Weight
A-Weighted sound pressure level
Sound power level
Vibration in the handle
Important Safety Rules
1. Always wear safety glasses, a face mask or respiratory equipment.
2. Always ensure machine is switched off before connecting air supply.
3. Disconnect any machine from the air supply before changing accessories, and before servicing any type of
machine.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion and
possible failure.
5. Do not wear watches, rings bracelets or loose clothing when using air tools.
6. Using only light weight coil hoses from a tool to the wall or compressor coupling.
7. Do not overload the machine. Allow the tool to operate at its optimum speed for maximum efficiency.
8. Do not increase the air pressure above the manufacturers recommended level, as excessive overload can
cause the machine casing to split. This also creates excessive wear on moving parts and possible failure.
9. In the interests of safety and possible damage to the machine/operator, always ensure that the machine has
stopped before putting it down after use.
10. Always ensure that the work piece is firmly secured leaving both hands free to control the machine.
11. Always ensure that the accessories are rated/designed for use with the machine. Also ensure they are
correctly and securely fastened before connecting the machine to the air supply.
Operating Instructions
6" Air Sander
(Dual Action)
6" (150 mm)
10,000 RPM
4 CFM (114 litre/min.)
90 PSI (6.3bar)
1/4"
3/8" ID
4.63 lbs (2.1kgs)
72.7 dB
83.7 dB
1.44 m/s
2
For any technical questions, please call 1-800-665-8685
2
8064685