Last Number Redial; Ending A Call; Call Waiting; Rejecting A Call - LG TONE PRO HBS-760 Guide De L'utilisateur

How to Use

Last Number Redial

- Press and hold the CALL button for 1 second to activate Last Number Redial.
The headset will beep and then call the last number dialed.

Ending a Call

- Briefly press the CALL button.

Call Waiting

- Answer a second call without hanging up the first call by pressing the CALL button for 1
second. Press the CALL button for 1 second to return to the original call.
- Briefly press the CALL button to terminate both calls at once.

Rejecting a Call

- Activate call reject by pressing the CALL button for 2 seconds when the handset rings.
* These functions may only be used if your handset supports them. For further information
about using these features, please consult your handset' s user manual.

Mic Mute

- Slide the VOLUME switch to the + position and the FF/REW switch to the REW position at
the same time for 1 second to mute/unmute the Mic during conversation.
* Caution: For your safety, do not use this function while driving.

Volume Control

- Slide the VOLUME switch to the + or - position to adjust the speaker volume.
- To prevent hearing loss, which is caused by listening to music for long periods of time,
the HBS-760 will emit a long beep tone or two beeps when you use the upper 6 volume
levels.

Vibration Control

- To activate or deactivate device vibration, slide the VOLUME switch to the + position for 2
seconds. You will hear "Vibrate on" or "Vibrate off" when it is activated or deactivated.
- When vibration is turned off, the headset will not vibrate when receiving an incoming call
or when it is out of range.
- Vibration will automatically be activated when the device is powered on.
8