UsingTheShaver; UsingTheTrimmer - Panasonic ES-LT33 Mode D'emploi

While charging
The charge status lamp (
glows.
The number of the battery
capacity indicator will increase
as charging progresses.
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause all the lamps to light up and then
turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is 10 – 35 °C
(50 – 95 °F). The battery may not charge properly or not at all
under extreme low or high temperatures.
The charge status lamp ( ) will blink when there is a problem
with charging.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
3
3
Disconnecttheadaptorafterchargingis
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
10
After charging is completed
)
All the lamps will light up and
then turn off after 5 seconds.

Usingtheshaver

1
1
Rotatethelockringtounlock
thepowerswitchandpressthe
powerswitch.
(See page 9.)
2
2
Holdtheshaverasillustrated
andshave.
• Start out shaving by applying gentle
pressure to your face. Stretch your skin
with your free hand and move the
shaver back and forth in the direction of
your beard. You may gently increase
the amount of pressure as your skin
becomes accustomed to this shaver.
Applying excessive pressure does not
provide a closer shave.
►Pivotactionselector

Use to select "SOFT" (soft) or "LOCK" (lock).
)
You can change the pivot action whether the
shaver is turned on or off.

►Usingthetrimmer


Slide the trimmer handle up. Place at
a right angle to your skin and move
downwards to trim your sideburns.