Glow Fire Brecht Instructions De Montage page 20

Step 5
Screw a total of 6 screw-in dowels into the board 6 in the second row (per side). Place 3
connecting housings (9 in total) in the pre-drilled holes of the outer sides. Make sure to place
the side of the board facing upwards on which an additional batten is attached.
Step 6
Now place the existing carcase from step 4 on board 6. Tighten the lower connecting housings of
boards 1 and 2 as far as they will go.
20 Stand: 11/2021
Version: 1