Technical Specifications - NGS ROLLER DRUM Mode D'emploi

USER'S MANUAL
AUX IN / LINE IN
When the audio cable is connected, you can connect the
device with the external multimedia audio sources through
the port AUX IN. After connection, just set the mode to AUX
by pressing the MODE button on the device.
HOW TO CHARGE?
AC POWER SUPPLY
Connect the Micro USB cable to the electrical network or
computer. The charging LED stays ON while charging, and
turns OFF once the battery reaches 100%.
LIGHTS
The lights are switched off or on by pressing and holding the
MODE button for 2 seconds.
4

TECHNICAL SPECIFICATIONS

Output power: 20W
Battery: 1200mAh/ 3.7 V
Working range: 10m
Frequency response: 90Hz~20kHz
USB port
Aux input
Micro input
FM Radio
MICRO SD card reader
LED screen
LED lights