Leifheit Air Flow M Solid Plus Mode D'emploi page 12

WARNING
Hazard levels!
Air Flow M Solid Plus Ironing Board
conforms to approved technical regula-
tions and to Electrical Safety Directive
2014/35/EU.
Connect this appliance to an AC power
supply only (voltage indicated on plate
on underside of appliance).
The appliance conforms to Directive
2014/30/EU regarding EMC.
Electrical safety of this appliance is only
assured when it is earthed according
to electrical safety regulations. The
manufacturer accepts no responsibility
for any damage which might result from
defective earthing of the appliance. If in
doubt, contact a qualified technician.
As far as possible, do not use any
adapters, multigang sockets or ex-
tension cables. If this is unavoidable,
only use an adapter, multigang socket
or extension cable which conforms to
safety regulations and never exceed
the maximum capacity indicated on the
adapter.
Do not use the ironing board if it is
visibly damaged or if the power cord or
plug is defective.
Do not touch the appliance with wet or
damp hands.
Do not touch the cord with wet or damp
hands or feet.
12
Do not immerse the ironing board,
power cord or mains plug in water or
other liquids.
Disconnect the plug from the mains
before cleaning.
Do not put any objects into the appli-
ance's apertures.
This device may be used by chil-
dren as of the age of eight years
and persons with reduced physical,
sensory or mental capacities or lack
of experience and/or knowledge, if
they are supervised or have received
instructions regarding the safe use of
the device, and have understood the
resulting risks.
Children may not play with the device.
Cleaning and maintenance of the
device may not be performed by chil-
dren without supervision.
Supervise children to make sure they
are not playing with the appliance.
Keep packaging away from children,
there is danger of suffocation!
Use and store the Ironing Board out-
side the reach of children.
Always loop the Ironing Board's cord
loosely. Avoid kinking the cord and al-
ways check for the cord for damage.
When using the iron, do not allow any
moisture to access electrical compo-
nents.
Repairs to this appliance should only
be carried out by Leifheit's Customer
Service or by authorised personnel.