Service Indicator - Hilti TE 500-AVR Mode D'emploi Original

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is an electrically powered breaker. It is designed for medium-duty chiseling work on
masonry and concrete.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which greatly reduces vibration.
3.4 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
• This product may not be connected to a power source providing a voltage and frequency not in
compliance with the information given on the type identification plate.
3.5

Service indicator

The breaker is equipped with a service indicator LED.
Status
The service indicator lights.
The service indicator blinks.
3.6 Items supplied
Breaker, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
*2146158*
1
@
;
=
%
&
(
)
+
§
/
Meaning
End of service interval – servicing is due.
The product is faulty. Have the product repaired by
Hilti Service.
2146158
Chuck
Function selector switch
Control switch
Control switch lock
Side handle
Knob
Service indicator
Lockbutton
Connector on electric tool
Supply cord with keyed, releasable plug con-
nector
English 5