Water Drainage Method; Continuous Drainage - TCL W8P95-B3 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.
Close doors
and windows

Water drainage method

When there is excess water condensation inside the unit, the appliance stops running and shows
"
". This indicates that the water condensation needs to be drained using the following
procedures:
Manual Draining
1.
Power off and unplug the unit from power source.
2.
Place a pan under the lower drain plug.
3.
Remove the lower drain plug.
4.
Water will drain out and collect in the pan.
5.
After the water is drained, replace the lower drain plug firmly.
6.
Turn on the unit.

Continuous drainage

When unit is running in Dry mode, you can use the method below for continuous drainage.
1.
Power off and unplug the unit from the power source.
2.
Remove the drain plug (Fig 1). Be cautious as some residual water may spill during this
setup process.
3.
Connect a drain hose (Fig. 2). Note: Drain hose is only included on select models.
4.
The water can be continuously drained through the hose into a floor drain or bucket.
5.
Turn on the unit.
1.
2.
Close curtains
2.
12
3.
Do not
cover
appliance
Drain
Outlet
Pan
Note:
garden hose will
Garden hose or
drainage hose
work for continuous
draining. Garden hose
is not included.
Drain
Cap
A standard

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

W10p95-b

Table des Matières