NAMCO POINT BLANK 2 Manuel De L'opérateur page 48

AIM AT THE CENTRE OF THE CROSS
3 . Aim the gun at the centre of the cross and pull the trigger. The gun sight is
set and the display will return to the previous test screen.
Note: Ensure that the gun is level and not slanted when aiming at the centre of
the cross otherwise the initialization may not be correct.
4. Repeat step 3 to confirm gun alignment.
5. Press P2 Start Button to switch from P1 Gun to P2 Gun.
6. Repeat steps 3 and 4 to initialize Gun 2.
7. Press P1 and P2 Start Switches together to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
P1 GUN INITIALIZE
AND PULL GUN TRIGGER.
Page 48