Device Configuration - Grandstream Networks GAC2500 Guide D'installation Rapide

3. The LCD will display the cascade connection interface, as shown below.
4. Adjust the conference settings by tapping the icons on the interface.

DEVICE CONFIGURATION:

Configuring the GAC2500 Using Web Browser:
1. Ensure the device is properly powered up and connected to the Internet using
standard connection.
2. The IP address of the phone will be shown up on the LCD.
3. Type the phone's IP address in your PC's browser (under the same LAN).
4. In the login page shown below, the default username and password for admin-
istrator are "admin" and "admin". The default username and password for user are
"user" and "123".
5
5. In the web GUI, select "Account" to configure Account name, SIP Server, SIP
User ID, Authenticate ID and Authenticate Password to register the account on
the device.
6. For configuring the network, select "Maintenance" --> "Network". Please contact
your ITSP (Internet Telephony Service Provider) for additional settings that may be
necessary to configure the phone.
Configuring the GAC2500 Using Touch Screen:
1. Make sure the device is properly powered up using standard connection and
in idle screen.
2. Select Settings -> Advanced Settings -> Account. Tap on one of the Accounts
to configure Account name, SIP Server, SIP User ID, SIP Auth ID, SIP Auth Pass-
word to register account on the GAC2500.
3. Once successfully registered, the main screen will be shown as below.
4. Please refer to the user manual for more configuration such as configuring the
static IP address.
5. Please contact your ITSP (Internet Telephony Service Provider) for additional
settings that may be necessary to configure the phone.
Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
This product is covered by one or more of the U.S. patents (and any foreign pat-
ent counterparts thereto) identified at www.cmspatents.com.
6