Dcf-Signal Reception - Velleman WS2800MP Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Overview

Refer to the illustrations on page 2 of this manual.

DST mode

time

radio-controlled clock

weekday

date

moon phase

weather forecast

absolute/relative barometric pressure

barometric pressure

outdoor sensor

outdoor temperature

max. outdoor temperature

Operation

5.1

Powering and Installation

The weather station will enter data reception mode as soon as the batteries have been

inserted. Therefore, we recommend placing the batteries in the thermo-hygrometer

first. Then, power the receiver console within 5 seconds time to optimize data

transmission and reception.

Do not puncture batteries or throw them in fire as they may explode. Do not attempt

to recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance

with local regulations. Keep batteries away from children.

Power both the thermo-hygrometer and receiver console.

Install the remote thermo-hygrometer at a distance of 5 to 10 meters away from the receiver console.

We recommend installing the thermo-hygrometer in a vertical position on a shaded north-facing wall, at

the same height as or above the receiver console.

Wireless communication is susceptible to interference, distance, walls and metal barriers.

Electro-Magnetic Interference (EMI)

Keep the thermo-hygrometer away from monitors, computers, etc.

Radio Frequency Interference (RFI)

Keep the thermo-hygrometer away from other devices using the 433 MHz frequency.

Line of Sight

The thermo-hygrometer has a range of 100 m (no interference, barriers or walls). Considering all

obstacles, the range will be about 30 m.

Metal Barriers

Radio waves will not pass through metal such as aluminium. Consider all metal barriers when

installing the sensors.

5.2